;To add Icon Message Information add : after index of message followed by one of the ;following alphabet for the corresponding Icon ; I eIconInfo ; E eIconError ; W eIconWarning ; Q eIconQuestion ; D eIconDrive ; F eIconFile ; U eIconUnspecified [BACKUP] 22:I=Backup process has been started for files whose verification was failed. 21:I=Check for files and folders on source have been started. 20:I=Check for files and folders on source have completed. 19:W=%I64d marked files could not be backuped. Please see logfile for details. Backup process completed with warnings. 18:I=There are no files remaining to create backup in current selection. 17:I=Deleting files from old archives. 16:I=File (%s) is modified after the backup is created so it cannot be verified. 15:I=Scan for files accessibility completed. 14:I=Scan for files accessibility started. 13:E=There is not enough free space available for compression. Please make sure you have free space equal to %s in the folder %s. If you press Cancel the backup process will be aborted. 12:I=No files or folders have been added, modified or deleted for this backup. 11:I=No valid files found for backup. 10:W=Backup process finished but some file(s) could not be backed up successfully. 4:I=Incremental backup operation started. 3:I=Differential backup operation started. 2:I=Update backup operation started. 1:I=Full backup operation started. 0:I=Backup process completed successfully. -1:E=Backup process failed. -2:E=Process aborted by user -3:W=Could not create backup information file -4:W=A backup job is in progress on hard disk. The remaining free space on target is %I64d MB. -5:E=Unable to create disk label file. -6:E=Unable to find disk label file. -7:E=Unable to create readme file. -8:E=Cannot clear archive attribute flag for file: %s. -9:E=Unable to open backup archive file on target path [%s]. -10:E=Unable to delete file from archive file [%s]. -11:E=Unable to create (%s) file. -20:E=Unable to set target recorder -21:E=Unable to copy backup information file to backup. -22:E=Deleting file [%s] from archive failed. -23:W=Backup process completed successfully but verification process has been failed. -24:W=File (%s) is not present on its original location and will be excluded from backup. -25:W=Open file/folder (%s) for reading has been failed. System error: %s. [DRIVEBACKUP] 16:I=The drive cannot be locked. ABORT has been pressed to cancel the process. 15:I=The drive cannot be locked. RETRY to lock the drive. 14:I=The drive cannot be locked. IGNORE and to continue without locking. 13:W=Backup process completed successfully but some files modified between the backup and verify process. This may happen if the selected partition/hard disk was not locked before backup. 12:I=A drive backup or drive restore is already in progress. Please wait... 11:I=Calculation of CRC for files has completed successfully. 10:I=Calculation of CRC for files has been started. 9:W=Nero BackItUp cannot lock the selected partition/hard disk because it is being used by another program. It is recommended that it is locked otherwise you may not get a fully consistent backup. If you intend to backup a system partition that is being used by a Windows operating system, it cannot be locked. If this is the case, click Ignore to continue without locking. Click Retry to try to lock again or Abort to cancel the process. 8:I=There is not enough free space available for compression in the cache folder. Compression is not possible now, so the remaining files will be added to backup without compression. 7:I=The selected backup contains the cache path, which is used for temporary files for compression. Compression is not possible now, so the remaining files will be added to backup without compression. 6:E=A drive image file (%s) is already present on the selected target. Overwriting this file may cause a damage of another drive backup!!! 5:I=Checking selected hard disk/partition information. This may take a while. -2:E=The selected hard drive drive for backup is not available. -3:E=The selected partition for backup is not available. -4:W=Nero API are not available for drive backup. -10:W=Unable to set target recorder -11:W=Calculation of CRC for files has failed. -12:E=Logical partition out of extended area. Extended start: %I64d, Extended end: %I64d, Logical start: %I64d, Logical end: %I64d. -13:W=The selected partition with start sector: %I64d, end sector: %I64d and file system: %s has no drive letter. The backup process will be continued without locking this partition. -14:E=Nero BackItUp is not able to recognize the file system of the selected partition and cannot be backed up using data compression. -15:E=The selected partition is formatted with a file system not supported by Nero BackItUp and cannot be backed up using data compression. -16:E=Invalid arguments while getting next used sector item. Start sector: %I64d, End sector: %I64d, Maximum sectors: %I64d. -17:E=An error has occurred while creating backup items. The active process will be aborted. [DRIVERESTORE] 0:I=Drive restore process has been completed successfully. 1:I=Drive restore process has been started. 2:I=Opening drive backup image file %s. 3:I=Opening drive %s. 4:I=Locking drive %s. 5:I=Restoring drive backup image file no %d. 6:I=Drive backup image file no %d has been restored successfully. 7:I=Requesting for next image file, image no: %d. 8:I=Writing file system. 9:I=Creating new partition. 10:I=Reorganization of file system is in progress. Please wait... 11:I=Opening drive starting at LBA %d on physical disk %d. 12:I=Locking drive starting at LBA %d on physical disk %d. 13:I=Opening physical disk %d. 14:I=Locking physical disk %d. 15:W=Changes made by drive restore process may be visible after system restart. 16:I=Reorganization of file system has been completed successfully. -1:E=Drive restore process has been failed. -2:E=%s is not a valid Nero BackItUp drive image. -3:E=Nero BackItUp drive image %s does not exist. -4:E=Nero BackItUp drive image %s is corrupt. -5:E=Drive locking has been failed. Please close all other programs accessing this drive and press retry. Press abort to terminate the drive restore process and ignore to continue without locking. -6:E=Error opening the drive for restore. -8:E=The file %s does not belong to this drive backup. Please insert the correct file. -10:E=Error unlocking drive %s. -11:E=Trying to access invalid partition number. -12:W=Please reboot the system for changes to take effect. -13:E=File system reorganization has failed with error: (%d) %s. [DRIVEACCESS] 0:I=Operation was successful. -1:E=Error occurred while performing last operation, system error: %d. -2:E=Error opening drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -3:E=Error locking the drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -4:E=Error while reading sector no: %I64d from drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -5:E=Error while writing sector no: %I64d to drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -6:E=Error while setting position to sector no: %I64d of drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -7:E=Error while getting position of drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -8:E=Error unlocking the drive: %s, start sector: %I64d, size: %I64d sectors, system error: %d. -9:E=Error while getting disk geometry of drive: %s, system error: %d. -10:E=Error flushing data, system error: %d. [VERIFY] 11:I=Verify succeeded, but some files were modified on hard disk and could not be verified. 10:I=Data verification of file(s) not completed successfully 6:I=Verification of Archive [%s] started. 5:I=Verification of Archive [%s] ended. 3:I=Verify backup completed successfully. 2:I=Verify backup operation started 1:I=Start Data Verification 0:I=The data verification process has been completed successfully. -1:E=Data Verification failed -2:E=Verify process has been aborted by the user. -3:E=Data verification has been failed. -6:E=Verification aborted. -11:W=Verification for file (%s) failed. -12:W=File (%s) has been modified since backup, Contents are different. -13:W=File (%s) has been modified since backup, CRC is different. -14:W=File (%s) has been modified since backup, Modified date is changed. -15:W=File (%s) has been modified since backup, File size is changed. -16:W=Verify process is not possible on this partition/hard disk because no source file tree is available!!! -17:W=Partition having start sector (%I64d) and partition type (0x%02x) does not have a mounted path. The CRC verification for this partition will not be possible. [IMAGEREADERVERIFY] 4:I=Verification of stream (%s) for file (%s) succeeded. Start data position: %I64d, Data size: %I64d. 2:I=%s of file (%s) is identified. 1:I=Verification of stream for file %s started. 0:I=Verification of stream for file %s completed successfully. -2:E=Unable to verify file stream empty file path is detected!!! -3:E=Stream of file (%s) is not identified for verification. -4:E=Size of current region is invalid. Detected region size: %I64d. -5:E=Failed to get current position of stream. Detected position: %I64d. -6:E=Failed to get the file size for (%s) in drive backup image. -8:W=File (%s) has been deleted from disk and cannot be verified. -9:W=Requested stream of file (%s) cannot be read from disk. -10:W=Read file (%s) from drive backup image has failed. Requested size: %d, Read size: %d. -11:E=Verification of stream (%s) for file (%s) failed. Start data position: %I64d, Data size: %I64d. [COMPRESSION] 11:I=Compression successfull (File: %s) (Size: %I64d) 10:E=Compression of file(s) not completed successfully 6:I=Compression and copy of Archive [%s] started. 5:I=Compression and copy of Archive [%s] ended. 4:I=Compression completed. 2:W=Unable to compress [%s] file 1:I=Compression of file(s) started 0:I=Compression of file(s) completed successfully -1:E=Compression of file(s) failed -2:E=Could not load compression library. -4:E=Creating compression header failed. -5:E=Open file for compression has been failed. -6:E=Compression aborted. -7:E=Opening compression has been failed. -8:E=Data Compression has been failed. -9:E=Closing compression has been failed. -10:E=Closing file in compression has been failed. -11:E=Compression failed (File: %s) (Size: %I64d) -21:E=Deleting file from archive has been failed. [DIRECTCOMPRESSION] 10:I=Direct compression of files completed 2:W=Direct compression for [%s] file failed 1:I=Direct compression of files started. No information will be written to your hard disk. 0:I=Direct compression of files completed successfully -1:E=Direct compression of files failed [DECOMPRESSION] 11:I=Decompression Successful (File: %s) (Size: %I64d) 1:I=Decompression of file(s) started. 0:I=Decompression of file(s) completed successfully. -1:E=Decompression of file(s) failed. -2:E=Opening file for decompression failed. -4:E=Reading compression header failed. -5:E=Opening file in compression failed. -6:E=Decompression aborted. -7:E=Closing file in decompression failed. -8:E=Data decompression has been failed. -9:E=Closing decompression has been failed. -10:E=An unexpected exception has been occurred. System error code: %d -11:E=Decompression failed (File: %s) (Size: %I64d) ;These are error codes for compression library. [COMPRESSION_LIB] -1:E=Compression error, I/O with file is failed. -2:E=Compression error, state for compression is invalid. -3:E=Compression error, data error(not all data is processed). -4:E=Compression error, there is not enough memory. -5:E=Compression error, not enough buffers provided for compression. -6:E=Compression error, incompatible library version. -102:E=Compression error, invalid parameters for copmression. -104:E=Compression error, internal error. -850:E=Data write error. The data is not written completely to the target file. ;These are error codes for decompression library. [DECOMPRESSION_LIB] -1:E=Decompression error, I/O with file is failed. -2:E=Decompression error, state for decompression is invalid. -3:E=Decompression error, compressed data is corrupted. -4:E=Decompression error, there is not enough memory. -5:E=Decompression error, not enough buffers provided for decompression. -6:E=Decompression error, incompatible library version. -102:E=Decompression error, invalid parameters set for decopmression. -103:E=Decompression error, bad compressed file. -104:E=Decompression error, internal error. -105:E=Decompression error, invalid CRC. [COPY] 11:I=Copy successfull (File: %s) (Size: %I64d) 10:I=Copy of file(s) not completed successfully 2:W=Unable to copy [%s] file 1:I=Start copy file(s) 0:I=End copy file(s) -11:E=Copy failed (File: %s) (Size: %I64d) -1:E=Copying file(s) failed -6:E=Copy aborted. [TEMPFILES] 1:I=Start of checking for temporary files 0:I=Checking for temporary files completed -1:E=Creating temporary information has failed [BURN] 4:W=A backup on disc is already in progress. Please wait until this is completed. 3:I=This backup was made to Nero Image Recorder. If you already burn the backup on a disc then please enter it OR you need to mount the correct image file using Nero ImageDrive and then select the mounted volume. 2:W=This disc contains some (%s) tracks that cannot be continued using Nero BackItUp. Please erase this disc or insert another one. [RESTORE] 19:I=Restore files in (folder: %s) 18:I=Restore successful (File: %s) (Size: %I64d), renamed to (File: %s), source location: %s. 17:I=Skip file because local copy is newer (File: %s) (Size: %I64d). 16:I=The defect file (%s) will be restored to (%s). 15:I=%I64d files restored. 14:I=%I64d files restored, %I64d files are not restored (local copy is newer). 13:I=%I64d files restored, %I64d files are not restored (local copy is newer), %I64d files couldn't be restored. 12:W=The necessory Backup file (%s) is not present on the expected location. Please specify the new location of the backup. 11:I=Restore successfull (File: %s) (Size: %I64d) 10:W=Restore completed, but some files could not be restored. 2:W=File [%s] was not backed up. 1:I=Restore started 0:I=Restore process completed successfully. -1:E=Restore process failed. -2:E=Restore process has been aborted by the user. -3:E=Restore of file to (%s) has been failed. -4:E=Unable to open backup archive (%s). -5:E=Cannot create FTP file with passed FTP connection data. -6:E=Cannot open the backup archive for passed FTP connection. -7:E=Cannot open the backup archive file (%s). -11:E=Restore failed (File: %s) (Size: %I64d) [SPLITFILES] 3:W=[%s] is bigger than ISO standard size. It will be split into parts. 2:I=Available size on disc: %s [%s], current file size: %s (%s). 1:W=[%s] is bigger than disc size. It will be split into parts. -1:E=Cannot split large file into small pieces for creating backup on multiple discs [FILE] -1:E=Open file/folder (%s) for reading has been failed. System error: %s -2:E=Open file/folder (%s) for writing has been failed. System error: %s -3:E=Read file (%s) has been failed. System error: %s -4:E=Write file (%s) has been failed. System error: %s -5:E=Create Directory (%s) has been failed. System error: %s -6:E=Delete Directory (%s) has been failed. System error: %s -7:E=Delete file (%s) has been failed. System error: %s -8:E=Set file attribute for (%s) has been failed. System error: %s -9:E=Get file attribute for (%s) has been failed. System error: %s -10:E=Set file time for (%s) has been failed. System error: %s -11:E=Set file position for (%s) has been failed. System error: %s -12:E=Get file size for (%s) has been failed. System error: %s -13:E=Close file (%s) has been failed. System error: %s -14:E=File cannot be renamed to (%s). System error: %s -15:E=Unable to read file (%s) because it is not opened. -16:E=Unable to write file (%s) because it is not opened. [GENERAL] 22:I=Enumerating available backups, please wait... 21:I=Scanning SCSI/IDE bus, please wait... 20:I=Loading hard drives information, please wait... 19:I=Mount drive %s at directory: %s 18:I=The drive backup process will make the first disc bootable. 17:W=The drive backup process will not make the %s disc as bootable. You can create another type of disc bootable by using Tools menu later. Click OK to burn or Cancel to insert another type of disc. 16:W=The currently inserted disc is %s that can only be written in one session. You will not be able to write any more files on this disc. Click OK to burn or Cancel to insert another type of disc. 15:I=Directory (%s) added to backup successfully. 14:I=The path already exists on target: %s 13:W=You have inserted a %s disc to burn this drive backup. Compression on this disc is not supported. Click OK to burn without compression or Cancel to insert another type of disc. 12:Q=The disc in the drive is not empty. Would you like to ERASE all existing data before writing? 11:I=Directory created successfully on path: %s 10:I=%s 4:W=File (%s) has been opened in shared mode. 3:I=Reading track information 2:I=Reading source path information using (%s) filter profile. This process may take several minutes. 1:I=Drive is in use by another application. -1:E=No free space available on target drive. Please restart restore process on another drive, Free space %s. -2:E=The current recorder/disc is not correct, please change your target recorder/disc. -3:E=Could not create backup information file -4:E=Unable to open last backup information file -5:E=Backup information file could not be opened -6:E=Unable to open disc ID file created during last backup -7:E=Cannot create directory on target location: %s -8:W=Unable to read data from the specified path (%s). System error: (%d) %s -9:W=Some files or folders are not accessable on the path (%s). System error: (%d) %s -10:E=Unknown Error -11:I=Create directory failed. -21:E=Could not load compression library. -22:E=Could not backup access rights for (%s). -23:E=Unable to get short path for file (%s). -25:E=Error occurred while listing network path: %s. System error : %s. -26:W=Please provide the correct login/password to access the network. -27:W=User name/Password input required for network authentication has been cancelled. -28:E=Cannot create network connection. System error : %s. -29:E=Cannot initialize network connection. System error : %s. [FTP] 16:I=Accessing ftp server through proxy %s 15:I=SSH based connection established. 14:I=Pinging server... 13:I=Session Ends Normally. 12:I=SSL based connection established. 11:I=Started reading ftp paths. 10:I=End reading ftp paths. 9:I=Trying to reconnect server. 8:I=%s 7:I=Ftp Command: %s 6:I=Data Socket Connected. 5:I=Disconnected. 4:I=Disconnecting FTP Server %s. 3:I=Connected, Now Authenticating user... 2:I=Socket Connected Waiting for welcome message. 1:I=Connecting FTP Server %s. 0:I=Connection Successful. -1:E=Connection Failed. -2:E=Login to FTP server failed. -3:E=Socket Connected Waiting for welcome message. -4:E=Data Socket FAILED. -5:E=Read from FTP file %s failed. -6:E=Write to FTP file %s failed. -7:E=Create Directory %s has been failed. -8:E=SSL based connection not established. -9:E=Listing of ftp path %s failed. -11:E=Create Directory %s failed. Permission denied. -12:W=This FTP command failed and the FTP server response is written below. -13:W=Directory listing process aborted by the user. Canceling all running processes. -14:W=Pinging server failed.. -15:E=SSH based connection not established. -16:E=Creation of SFTP process failed. -17:E=NBSFtp is blocked. Closing down connection... -18:W=SFtp Connection is closed. -19:E=No response from SFTP server. -21:E=Open file (%s) for reading has been failed. -22:E=Open file (%s) for writing has been failed. -23:E=%s -24:E=NeroBackItUp was not able to acquire the system resource. System error code: %d. -25:E=NBSFtp does not exist at the required place. -26:E=Authenticating into proxy server failed. -27:E=Proxy server requires authentication. -28:E=Authentication type requested by the proxy server is unknown or not supported. -29:E=Can't resolve host name to connect through proxy server. -30:E=Socket connection can't be established with the proxy server. -31:E=Proxy request failed, can't connect to the application host through proxy server. [VIRUSSCAN] -8:E=Sorry, the Nero antivirus libraries could not be updated. -7:E=Some viruses have been found in boot sector. -6:E=File (%s) is probably infected by (%s) virus. -5:E=File (%s) is infected by (%s) virus that could not be cured. -4:E=An unknown error occurred during the virus scan. -3:E=Out of memory error during the virus scan. -2:E=A read error occurred for file (%s) during the virus scan. -1:W=File (%s) might be infected by an unknown virus. 0:I=Scanning for viruses started 1:I=Scanning for viruses has been completed successfully. 2:E=Scanning for viruses has been failed. 3:I=BackItUp found (%I64d) infected files among the (%I64d) scanned files. 4:I=File (%s) was infected by (%s) virus. It is cured successfully. 5:I=Update of Nero antivirus libraries started. 6:I=Update of Nero antivirus libraries successful. [VERIFYDRIVEBACKUP] 17:W=Some sectors are added to the target drive starting from sector number %I64d, New: %d. 16:w=Some sectors are missing from the target drive starting from sector number %I64d, Missed: %d. 15:I=Headers are same. 14:I=Start verifying headers. 13:I=Headers are not same. 12:W=The data verification process has been completed but some files have been modified since the backup. 11:E=Verification of drive backup failed. 10:I=Verification of drive backup has been completed successfully. 9:I=Verification of drive backup has been started. 8:W=Backup file content differs from the hard drive data. 7:W=Backup file contains incorrect hard drive information. 6:W=Sectors from %I64d to %I64d in drive backup image are different from source. 5:W=Sector %d in drive image has different content on source. 4:W=Read error on disc from sector %d to %d 3:W=Read error on disc at sector %d 2:W=Read error on hard drive from sector %d to %d 1:W=Read error on hard drive at sector %d 0:I=No error -1:E=Disc file is missing -2:E=Hard drive file is missing -3:E=Disc file is inaccessible -4:E=Hard drive file is inaccessible -5:E=Read error on disc file -6:E=Read error on hard drive file -7:E=Directory missing on disc -8:E=Directory missing on hard drive -9:E=Can not mount the written disc -10:E=Drive letter of the recorder is unknown! -11:E=Unknown verify error -12:E=Out of memory -13:E=I/O error while reading the file system structure -14:E=Error caused by corrupt file system structure -15:E=Error caused by supplying wrong parameters to the file system -16:E=Too many locks of the file system buffers -17:E=Can not find the corresponding file system on the destination disc -18:E=Drive verification process has been canceled. -19:E=Drive verification process has been failed. -20:E=Verification is not possible! Seleted partition conflict!!! [ENCRYPTION] -1:E=Initialization of classic encryption failed. -2:E=Classic encryption of data failed. -3:E=Initialization of Microsoft Windows encryption failed, System error code: %d. -4:E=Microsoft Windows encryption of data has been failed, System error code: %d. -5:E=Initialization of AES encryption failed. -6:E=AES Encryption of data failed. [DECRYPTION] -1:E=Initialization of classic decryption failed. -2:E=Classic decryption of data failed. -3:E=Initialization of Microsoft Windows decryption failed, System error code: %d. -4:E=Microsoft Windows Decryption of data failed, System error code: %d. -5:E=Initialization of AES decryption failed. -6:E=AES Decryption of data failed. [COPYDRIVERESTOREIMAGE] 3:I=The drive restore boot image has been written successfully. Please insert another disc to write the drive restore program executables. Please press OK when you finished. 2:I=Opening image: %s. 1:I=Copy image process has been started. 0:I=Copy image proces has been finished successfully. -1:E=Copy image proces has been failed. -2:E=There is no space left on selected target. -3:E=Copy image process has been aborted by the user. -4:E=Unable to create the drive access object. -5:E=An unhandled exception has been occurred while copying the drive restore program image. -6:E=No boot image information is available at specified location. [SOCKET] -1:E=Opening socket call failed, System error code: %d. -2:E=Closing of socket failed, System error code: %d. -3:E=Connecting to socket failed, System error code: %d. -4:E=Listening socket failed, System error code: %d. -5:E=Accept socket call failed, System error code: %d. -6:E=Sending data on socket failed, System error code: %d. -7:E=Receiving data on socket failed, System error code: %d. -8:E=Getting of socket (ip and port) failed, System error code: %d. -9:E=Getting of peer socket (ip and port) failed, System error code: %d. -10:E=DNS lookup of the address failed, System error code: %d. [SHADOWCOPY] 4:I=The system is already creating the shadow copy for another backup process. This backup will continue once the other process is finished. Please have patience. 3:I=Nero BackItUp will take several seconds to release the system resources allocated while shadow copy process. Please wait... 2:I=Nero BackItUp will read files directly from hard disk instead of reading from shadow copy. 1:I=Preparing shadow copy for backup. Please wait... 0:I=Shadow copy has been created successfully. Files will be read from shadow copy. -1:W=Failed to create shadow copy. -2:W=The volume shadow copy service is disabled and can not be used. [IMAGEREADER] 4:I=Restoring selected files from backup image has been completed with errors. 3:I=Restoring selected files from the backup image has been completed successfully. 2:I=Restoring selected files from the backup image has started. 1:I=Creating a list of files from the drive backup image has started. 0:I=Creating a list of files from the drive backup image has completed successfully. -1:E=Creating a list of files from the drive backup image has failed. -2:E=Initialization of the cache manager has failed with error: %d. -3:E=Finding the partition index has failed and the selected volume cannot be verified. -4:E=Unknown partition type %d. -5:E=Initialization of the file system parser has failed. Error code: %d -6:E=Partition %d (%s) has an invalid root node. -7:E=Cannot create destination file at %s. This item will not be restored. -8:E=A fatal error occurred during the restore operation. -9:E=An item at source path %s cannot be verified. Error code: %d. -10:E=A fatal error occurred while verifying the operation. -11:E=Restoring hard links for %s has failed with status: %d. -12:E=Restoring EA attributes for %s has failed with status: %d. -13:E=Restoring symbolic link (reparse point) for %s has failed with status: %d. -14:E=Restoring $OBJECT_ID attribute for %s has failed with status: %d. -15:E=Restoring security information for %s has failed with status: %d. -16:E=A write error to destination file %s. -17:E=An error occurred while initializing VCM module. -18:E=An error [%d] occurred while verifying data stream of (%s). -19:E=File <%s> has a cross-linked area with the following items: -20:E=File <%s> has a cross-linked area {%08I64X-%08I64X} -100:E=[NTFS]: An error %d occurred while processing the system area of MFT. -101:E=[NTFS]: The given partition is not NTFS volume or is corrupted. -102:E=[NTFS]: Fatal error in unpacking layout of the $MFT file. -103:E=[NTFS]: An error in checking the volume state. It might have the unsupported version of the file system. -104:E=[NTFS]: Fatal error: $MFT file does not have the $DATA attribute. -105:W=[NTFS]: Volume does not have $Secure file or it cannot be found. Restoring security information will be impossible. -106:W=[NTFS]: Sector %I64d has invalid file record. Some item cannot be restored. -107:W=[NTFS]: MFT file record # %I64d is corrupted. -108:E=[NTFS]: An error occurred while unpacking the layout of (%s) item. It cannot be restored. -109:E=[NTFS]: An error occurred while unpacking layout of stream %d for( %s) item. Some data in this file cannot be restored. -110:E=[NTFS]: An error occurred while decompressing data of (%s) file. -111:E=[NTFS]: Restoring alternate data stream for (%s) has failed. The target file system probably does not support this feature. -112:E=[NTFS]: Restoring encrypted file (%s) has failed. Some data could be inaccessible. -200:E=[%s]: Cannot read the boot sector. -201:E=[%s]: The given partition is not FAT volume or is corrupted. -202:W=[%s]: The master copy of File Allocation Table has some errors and cannot be processed. Trying to parse the secondary copy. -203:E=[%s]: File Allocation Table is corrupted. Restoring from this volume might be impossible. -1000:E=Internal error: Item %s does not have layout information. -1001:E=Internal error: Item %s has non-standard layout of its attributes. Current version skips it. -9999:W=Assertion failed!!! (%s). [TAPE] 11:I=TSMAP has been read successfully. 10:I=Successfully Initialize tape handle. 9:I=Closes the handle successfully, Tape Ejected. 8:I=Open the handle successfully. 7:I=Successfully rewind the tape. 6:I=Successfully moves the filemark. 5:I=Successfully moves the fla to %d offset. 4:I=Successfully moves the pba to %d offset. 3:I=Successfully write the backup tree into a dataset. 2:I=Data erased successfully from tape medium. 1:I=Full backup operation started. 0:I=Data set restored successfully. -1:E=Data set: %d not present. -2:E=Error in erasing data from tape medium. -3:E=Error in writing the backup tree into a dataset. -4:E=Error moving pba. -5:E=Error moving fla. -6:E=Error Moving Filemark. -7:E=Error in rewinding the tape. -8:E=Error in opening the tape handle, handle already opened. -9:E=Error in closing the tape handle. -10:E=Error Initializing. -11:E=Error Reading TSMAP. -12:E=MTF not supported. [LINUXGUI] 0:I=Linux GUI has been created successfully. -1:W=Unable to load image. System error: %s [DATABASE] 0:I=Database operation has completed successfully. 1:E=SQL error or missing database. 2:E=An internal logic error in SQL. 3:E=Database access permission denied. 4:E=Database callback routine requested an abort. 5:E=The database file is locked. 6:E=A table in the database is locked. 7:E=Database memory allocation has failed. 8:E=Attempt to write a READONLY database. 9:E=Database operation has terminated. 10:E=Disk I/O error has occurred in an database operation. 11:E=The database disk image is malformed. 12:E=Table or record not found in database. 13:E=Insert record has failed because database is full. 14:E=Unable to open the database file. 15:E=Database lock protocol error. 16:E=Database is empty. 17:E=The database schema has changed. 18:E=Too much data for one row of a table in database. 19:E=Operation has aborted due to database constraint violation. 20:E=Database data type mismatch. 21:E=Database library is used incorrectly. 22:E=Used operating system features for database are not supported on host. 23:E=Database authorization denied. 24:I=Database insertion operation has been started. 25:I=Database insertion operation has completed successfully. 26:E=Database insertion operation has failed. 27:I=Database searching operation has been started. 28:I=Database searching operation has completed successfully. 29:E=Database searching operation has failed. 30:E=Database invalid field index is requested. 31:E=Database invalid field name is requested. 32:E=Database transaction operation can not be completed. [CLONE] 2:I=Clone process has completed successfully. 1:I=Clone process has been started. -1:E=Clone process has failed. -2:E=Clone process has aborted by user. [EMAILNOTIFY] 0:I=Socket object is not created. 1:I=Server name is empty. 2:I=Socket creation has failed. 3:E=Failed to make connection with server: %s. 4:E=Start session for smtp has failed. 5:E=Invalid sender email ID: %s. 6:E=Invalid recipient email ID: %s. 7:E=No connection with the server. 8:E=Invalid response for MAIL FROM command. 9:E=Invalid response for RCPT TO command. 10:E=Invalid response for DATA command. 11:E=Invalid extra response for DATA command. 12:E=Failed to send message and message headers. 13:E=Failed to send the final boundary of the e-mail. 14:E=Invalid file path: %s. 15:E=Failed to send the attachment boundary. 16:E=Failed to send the attachment headers. 17:E=Failed to create file object: %s. 18:E=Failed to send encoded attachment data. 19:E=Invalid response for AUTH LOGIN command. 20:E=Failed to send encoded user name. 21:E=Invalid response for USERNAME. 22:E=Response code: %s. 23:E=Failed to send encoded password. 24:E=Invalid response for PASSWORD. 25:E=Invalid response for AUTH PLAIN command. 26:E=Failed to send user name. 27:E=Failed to send password. 28:E=Authentication has failed. 29:I=Your message has been sent successfully. 30:E=An error has occurred during sending e-mail message.