:) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1227MB (1256736kB) Memory in use : 60 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2018 Проект ISO 23:26:44 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 23:26:44 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 23:26:44 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 23:26:44 #4 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 23:26:44 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 86815 ( 19:17.40, 169MB) 23:26:44 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 23:26:44 #7 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 23:26:44 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:26:44 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 86816 (86816) = #86816/19:17.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 86816 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 23:26:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 177799168, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 86816 | 0 | 0x00 86816 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 23:26:44 #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:26:44 #12 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 23:26:44 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 23:26:44 #14 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 23:26:44 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 23:26:44 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22 160 Кб/с) 23:26:44 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:26:45 #18 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 23:26:45 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:26:45 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:26:45 #21 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7203S Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 23:26:45 #22 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7203S Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 23:26:45 #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 23:26:45 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 23:27:17 #25 Text 0 File WriterStatus.cpp, Line 113 start writing Lead-Out at LBA 86816 (15320h), length 0 blocks 23:27:23 #26 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 23:28:15 #27 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 86816 23:28:15 #28 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 23:28:15 #29 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 16x (22 160 Кб/с) 23:28:15 #30 Phase 78 File dlgbrnst.cpp, Line 1762 Data verification started 23:28:18 #31 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 23:28:36 #32 Phase 80 File dlgbrnst.cpp, Line 1762 Data verification completed successfully 23:28:37 #33 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 23:28:42 #34 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 23:28:42 #35 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1221MB (1251292kB) Memory in use : 60 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2018 Проект ISO 23:33:31 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 23:33:31 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 23:33:31 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 23:33:31 #4 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 23:33:31 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 50431 ( 11:12.31, 98MB) 23:33:31 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 23:33:31 #7 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 23:33:31 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:33:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 50432 (50432) = #50432/11:12.32 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 50432 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 23:33:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 103284736, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 50432 | 0 | 0x00 50432 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 23:33:31 #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:33:31 #12 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 23:33:31 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 23:33:31 #14 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 23:33:31 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 23:33:31 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22 160 Кб/с) 23:33:32 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:33:32 #18 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 23:33:32 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:33:32 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:33:32 #21 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7203S Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 23:33:32 #22 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7203S Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 23:33:32 #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 23:33:32 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 23:33:55 #25 Text 0 File WriterStatus.cpp, Line 113 start writing Lead-Out at LBA 50432 (C500h), length 0 blocks 23:33:59 #26 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 23:34:57 #27 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 50432 23:34:57 #28 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 23:34:57 #29 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 16x (22 160 Кб/с) 23:34:57 #30 Phase 78 File dlgbrnst.cpp, Line 1762 Data verification started 23:35:00 #31 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 23:35:11 #32 Phase 80 File dlgbrnst.cpp, Line 1762 Data verification completed successfully 23:35:12 #33 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 23:35:17 #34 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 23:35:17 #35 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1214MB (1243904kB) Memory in use : 60 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2018 Проект ISO 23:37:18 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 23:37:18 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 23:37:18 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 23:37:18 #4 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 23:37:19 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 50431 ( 11:12.31, 98MB) 23:37:19 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 23:37:19 #7 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 23:37:19 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 23:37:19 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 50432 (50432) = #50432/11:12.32 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 50432 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 23:37:19 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 103284736, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 50432 | 0 | 0x00 50432 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 23:37:19 #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 23:37:19 #12 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 23:37:19 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 23:37:19 #14 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 23:37:19 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 23:37:19 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22 160 Кб/с) 23:37:19 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 23:37:19 #18 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 23:37:19 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:37:19 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 23:37:19 #21 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7203S Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 23:37:19 #22 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7203S Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 23:37:19 #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 23:37:19 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 23:37:42 #25 Text 0 File WriterStatus.cpp, Line 113 start writing Lead-Out at LBA 50432 (C500h), length 0 blocks 23:37:50 #26 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 23:38:48 #27 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 50432 23:38:48 #28 Phase 129 File dlgbrnst.cpp, Line 1762 Generating DVD borders completed successfully 23:38:48 #29 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 16x (22 160 Кб/с) 23:38:48 #30 Phase 78 File dlgbrnst.cpp, Line 1762 Data verification started 23:38:51 #31 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 23:39:02 #32 Phase 80 File dlgbrnst.cpp, Line 1762 Data verification completed successfully 23:39:03 #33 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 23:39:08 #34 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 23:39:08 #35 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1464MB (1499564kB) Memory in use : 52 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.5.2019 JukeBox (MP3, WMA, Nero Digital) 5:23:46 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:23:46 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:23:46 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 5:23:46 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 5:23:46 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 5:24:11 #6 Phase 40 File dlgbrnst.cpp, Line 1762 Aborted by user 5:24:11 #7 Text 0 File DlgWaitCD.cpp, Line 307 Disc check failed: Medium not allowed (Wrong CD) 5:24:11 #8 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:24:11 #9 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S Medium not present 5:24:11 #10 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Compilation cannot be written on that medium type. (Medium in drive: DVD+R. Medium required by compilation: CD-R/RW.) 5:24:11 #11 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1290MB (1321668kB) Memory in use : 57 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.5.2019 Проект ISO 5:29:25 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:29:25 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 5:29:25 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 5:29:25 #4 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 5:29:25 #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 473151 (105:08.51, 924MB) 5:29:25 #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 5:29:25 #7 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 5:29:25 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:29:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 473152 (473152) = #473152/105:8.52 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 473152 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 5:29:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 969015296, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 473152 | 0 | 0x00 473152 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:29:25 #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:29:25 #12 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 5:29:25 #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 5:29:25 #14 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 5:29:25 #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 5:29:25 #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22 160 Кб/с) 5:29:25 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:29:25 #18 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:29:25 #19 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 5:29:25 #20 SPTI -1065 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 5:29:25 #21 Text 0 File DVDR.cpp, Line 7281 Drive: Optiarc DVD RW AD-7203S Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished with error, return code -1065 5:29:25 #22 Text 0 File DVDR.cpp, Line 6662 Drive: Optiarc DVD RW AD-7203S Book Type request [NEC]: DVD-ROM Changing the Book Type was finished with error, return code -1065 5:29:25 #23 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 5:29:25 #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 5:37:41 #25 Text 0 File WriterStatus.cpp, Line 113 start writing Lead-Out at LBA 473152 (73840h), length 0 blocks 5:38:06 #26 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 473152 5:38:06 #27 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 16x (22 160 Кб/с) 5:38:07 #28 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:38:12 #29 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 5:38:12 #30 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1231MB (1261324kB) Memory in use : 59 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2019 CD-ROM (ISO) 13:32:59 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:32:59 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:32:59 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 13:32:59 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 13:33:00 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 13:33:00 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 327715 ( 72:51.40) 13:33:00 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 13:33:00 #8 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 13:33:00 #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:33:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 327716 (327716) = #327716/72:49.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 327714 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 13:33:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 671469568, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 327716 | 0 | 0x00 327716 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 13:33:00 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 2 run-out blocks from end of track 1. Length: 327716 -> 327714. 13:33:00 #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:33:00 #14 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 13:33:00 #15 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 13:33:00 #16 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 13:33:00 #17 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 13:33:00 #18 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 48x (7 200 Кб/с) 13:33:00 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:33:00 #20 Text 0 File MMC.cpp, Line 22344 Set BUFE: Buffer underrun protection -> ON 13:33:00 #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 13:33:19 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 01 E0 00 00 20 00 00 00 Sense Area: 0xF0 00 03 00 00 00 0C 0A 00 00 00 00 0C Buffer x19190400: Len x10000 0x79 DD F9 9B 4F 5A D8 AD C9 6F 59 AD B5 57 2E D3 0x0A AC EA 94 50 42 9F 79 4B E2 A5 B7 4C 29 93 90 0x50 B0 38 F0 20 02 8D 29 68 08 2A 05 04 06 46 DA 13:33:19 #23 CDR -1135 File Writer.cpp, Line 303 Write error D: Optiarc DVD RW AD-7203S 13:33:19 #24 CDR -201 File WriterStatus.cpp, Line 195 Invalid write state D: Optiarc DVD RW AD-7203S 13:33:19 #25 TRANSFER -18 File WriterStatus.cpp, Line 195 Could not perform EndTrack 13:33:19 #26 Text 0 File MMC.cpp, Line 17098 <灏楴牡⁣䐀䑖删⁗噄⁄坒䄠ⵄ㈷㌰⁓㄀〮6ł> start Close Session 13:33:19 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 13:33:19 #28 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error D: Optiarc DVD RW AD-7203S 13:33:19 #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 13:33:19 #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 13:33:20 #31 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 48x (7 200 Кб/с) 13:33:20 #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:33:23 #33 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 13:33:23 #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1229MB (1259496kB) Memory in use : 59 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2019 CD-ROM (ISO) 13:33:38 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:33:39 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:33:39 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 13:33:39 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 13:33:39 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 13:33:47 #6 Phase 40 File dlgbrnst.cpp, Line 1762 Aborted by user 13:33:47 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 13:33:48 #8 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S; CD type reading failed ATIP Data: ? 13:33:48 #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Неизвестный. Medium required by compilation: CD-R/RW.) 13:33:48 #10 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1219MB (1248860kB) Memory in use : 60 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2019 CD-ROM (ISO) 13:40:35 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:40:36 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:40:36 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 13:40:36 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 13:40:36 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 13:40:36 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 327715 ( 72:51.40) 13:40:36 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 13:40:36 #8 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 13:40:36 #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:40:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 327716 (327716) = #327716/72:49.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 327714 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 13:40:36 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 671469568, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 327716 | 0 | 0x00 327716 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 13:40:36 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 2 run-out blocks from end of track 1. Length: 327716 -> 327714. 13:40:36 #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:40:36 #14 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 13:40:36 #15 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 13:40:36 #16 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 13:40:36 #17 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 13:40:36 #18 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 48x (7 200 Кб/с) 13:40:36 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:40:36 #20 Text 0 File MMC.cpp, Line 22344 Set BUFE: Buffer underrun protection -> ON 13:40:36 #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 13:40:49 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x190a0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13:40:49 #23 CDR -1106 File Writer.cpp, Line 303 Power calibration error D: Optiarc DVD RW AD-7203S 13:40:49 #24 CDR -201 File WriterStatus.cpp, Line 195 Invalid write state D: Optiarc DVD RW AD-7203S 13:40:49 #25 TRANSFER -18 File WriterStatus.cpp, Line 195 Could not perform EndTrack 13:40:49 #26 Text 0 File MMC.cpp, Line 17098 <灏楴牡⁣䐀䑖删⁗噄⁄坒䄠ⵄ㈷㌰⁓㄀〮6ł> start Close Session 13:40:49 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 13:40:49 #28 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error D: Optiarc DVD RW AD-7203S 13:40:49 #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 13:40:49 #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 13:40:56 #31 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 48x (7 200 Кб/с) 13:40:56 #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:41:00 #33 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 13:41:00 #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1284MB (1314956kB) Memory in use : 58 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2019 CD-ROM (ISO) 13:41:35 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:41:35 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:41:35 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 13:41:35 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 13:41:35 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 13:41:35 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 327715 ( 72:51.40) 13:41:35 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 13:41:35 #8 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 13:41:35 #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:41:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 327716 (327716) = #327716/72:49.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 327714 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 13:41:35 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 671469568, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 327716 | 0 | 0x00 327716 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 13:41:35 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 2 run-out blocks from end of track 1. Length: 327716 -> 327714. 13:41:35 #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:41:35 #14 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 13:41:35 #15 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 13:41:35 #16 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 13:41:35 #17 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 13:41:35 #18 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 48x (7 200 Кб/с) 13:41:35 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:41:35 #20 Text 0 File MMC.cpp, Line 22344 Set BUFE: Buffer underrun protection -> ON 13:41:35 #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 13:41:46 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x0ad60040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13:41:46 #23 CDR -1106 File Writer.cpp, Line 303 Power calibration error D: Optiarc DVD RW AD-7203S 13:41:46 #24 CDR -201 File WriterStatus.cpp, Line 195 Invalid write state D: Optiarc DVD RW AD-7203S 13:41:46 #25 TRANSFER -18 File WriterStatus.cpp, Line 195 Could not perform EndTrack 13:41:46 #26 Text 0 File MMC.cpp, Line 17098 <灏楴牡⁣䐀䑖删⁗噄⁄坒䄠ⵄ㈷㌰⁓㄀〮6ł> start Close Session 13:41:46 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 13:41:46 #28 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error D: Optiarc DVD RW AD-7203S 13:41:46 #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 13:41:46 #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 13:41:47 #31 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 48x (7 200 Кб/с) 13:41:47 #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:41:51 #33 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 13:41:51 #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ====== :) 1C82-0020-19E5-M45X-0EEE-0E4E-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 (Nero Express) Recorder: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: Version: 1.06 - HA 1 TA 0 - 7.8.5.0 Adapter driver: HA 1 === Scsi-Device-Map === CdRomPeripheral : Optiarc DVD RW AD-7203S atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD5000AADS-00L4B1 atapi Port 1 ID 0 DMA: On CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 4 ID 0 DMA: Off === CDRom-Device-Map === Optiarc DVD RW AD-7203S D: CDRom0 NERO IMAGEDRIVE2 L: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 1260MB (1290788kB) Memory in use : 58 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.7.2019 CD-ROM (ISO) 13:42:25 #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 13:42:25 #2 Text 0 File Isodoc.cpp, Line 6608 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:42:25 #3 Text 0 File Burncd.cpp, Line 3187 Optiarc DVD RW AD-7203S Защита опустошения буфера активирован 13:42:25 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 13:42:25 #5 Text 0 File Burncd.cpp, Line 3499 Turn on Track-At-Once, using CD-R/RW media 13:42:26 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 327715 ( 72:51.40) 13:42:26 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 13:42:26 #8 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: Optiarc DVD RW AD-7203S; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 13:42:26 #9 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:42:26 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 327716 (327716) = #327716/72:49.41 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 327714 blocks [D: Optiarc DVD RW AD-7203S] -------------------------------------------------------------- 13:42:26 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: Optiarc DVD RW AD-7203S] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 671469568, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 327716 | 0 | 0x00 327716 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 13:42:26 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066 Removed 2 run-out blocks from end of track 1. Length: 327716 -> 327714. 13:42:26 #13 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:42:26 #14 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 13:42:26 #15 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 13:42:26 #16 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 13:42:26 #17 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 13:42:26 #18 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 48x (7 200 Кб/с) 13:42:26 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:42:26 #20 Text 0 File MMC.cpp, Line 22344 Set BUFE: Buffer underrun protection -> ON 13:42:26 #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 13:42:43 #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x0ad60040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 13:42:43 #23 CDR -1106 File Writer.cpp, Line 303 Power calibration error D: Optiarc DVD RW AD-7203S 13:42:43 #24 CDR -201 File WriterStatus.cpp, Line 195 Invalid write state D: Optiarc DVD RW AD-7203S 13:42:43 #25 TRANSFER -18 File WriterStatus.cpp, Line 195 Could not perform EndTrack 13:42:43 #26 Text 0 File MMC.cpp, Line 17098 <灏楴牡⁣䐀䑖删⁗噄⁄坒䄠ⵄ㈷㌰⁓㄀〮6ł> start Close Session 13:42:43 #27 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 13:42:43 #28 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error D: Optiarc DVD RW AD-7203S 13:42:43 #29 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 13:42:43 #30 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 13:42:45 #31 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 48x (7 200 Кб/с) 13:42:45 #32 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 13:42:50 #33 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 13:42:50 #34 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero Burning ROM, History File *** ======